Choose the best bollard grips for textile threads and wires from Seatallan, designed to cope with up to 100kN tensile loading (depending on model and the sample's coefficient of friction against the bollard).
Our efficient bollard grips are designed to BS EN standards so that the sample can be wrapped around the bollard and held by the tail end. By spreading the load around the bollard and the friction of the sample, this reduces the incidents of samples suffering a jaw break. Some models incorporate pneumatic clamping.
All Seatallan materials testing grips are available to buy online 24/7/365, and we ship to anywhere in the world. If you don't see exactly what you need, just call us on +44 (0)1489 790049. We design and manufacture a wide variety of materials testing grips and fixtures produced to your exact specifications.
The rope is wrapped around each bollard, once or twice, depending on it’s diameter and then the tail is clamped in a vice. The bollard diameter is 40mm.
A bollard type rope grip with a manual vice for clamping the tail end of the sample. The bollard diameter is 200mm which gives a 10:1 ratio of maximum rope diameter to bollard diameter as prescribed by BS EN 919. The rope is held over one full circumfe
A bollard type rope grip with a manual vice for clamping the tail end of the sample. The bollard diameter is 150mm which gives a 10:1 ratio of maximum rope diameter to bollard diameter as prescribed by BS EN 919.
The rope is wrapped around a bollard, once or twice, depending on it’s diameter and then the tail is clamped in a vice. The bollard diameter is 40mm. The vice will accommodate rope up to 8mm maximum.
The grip operates on the bollard and clamp principle. The bollard is 20mm in diameter and made from stainless steel. The clamp consists of a pair of friction washers and a thumbscrew.
Office: +44 (0) 1489 790049
Fax: +44 (0) 1489 790040
Email: sales@seatallan.com
Our mailing address is:
Unit 1 Calcot Mount
Curdridge, Southampton
UK
SO32 2BN
Registered in England No. 3070765
