Call us: +44 (0)1489 790049

A- A A+
ST44 10kN Rope Grip_productST44 10kN Rope Grip
Move your mouse over image or click to enlarge
ST44 10kN Rope Grip_product ST44 10kN Rope Grip

ST44 10kN Rope Grip

Price / kg:
Ask a question about this product

Product Description

Maximum Load

10kN. This is the rating of the grip, the actual force that can be applied to the sample will depend on its coefficient of friction against the bollard.


Sample Size

8mm diameter.


Sample Type

Ropes, yarns and twines.



2.3 kg per pair.




The rope is wrapped around a bollard, once or twice, depending on it’s diameter and then the tail is clamped in a vice. The bollard diameter is 40mm. The vice will accommodate rope up to 8mm maximum. Friction between the bollard and the rope and the initial tension from the vice take the load applied by the tensile testing machine. If testing to BS EN919 then it should be noted that the ratio of bollard diameter to rope diameter should be a minimum of 10:1.


The grip is designed to be loaded by holding the sample in the left hand, winding it round the bollard and then passing it through the jaws of the vice. The clamp is operated with the right hand. The grip should be arranged on the anchor pin on a front to back axis with the clamp to the right hand side.

Our Location

Hours of Operation:

Customer service and office hours are
8:30 am - 5:00 pm Monday to Thursday

8:30 am - 3:30 pm Friday

Contact Us

Office: +44 (0) 1489 790049

Fax: +44 (0) 1489 790040


Our mailing address is:

Unit 1 Calcot Mount

Curdridge, Southampton


SO32 2BN

Registered in England No. 3070765





Translate Site

English Chinese (Simplified) French German Greek Italian Portuguese Russian Spanish



Site Map

Copyright © 2015 Seatallan Ltd. All rights reserved. Website Design by Akira Studio Ltd